Seat Functions Control Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Power Standard Seat:

Fig 1: Memory Seat/Steering Column Adjustment Control Module -J136-

Courtesy of AUDI

-- Open the tabs -arrows-.

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.

Comfort/Sport/Super Sport seat:

Courtesy of AUDI

-- Release the retaining tabs -arrows-.

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.