Seat Functions Control Module, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- If the control module was replaced, follow the sequence when connecting the connectors.
-- First connect the connector -5- (coding connector), then connect the other connectors -1 to 4-.
Further installation is performed in reverse order of removal, while noting the following:
-- Install the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .