Seat Angle Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the bolt -1- for the seat angle adjustment motor adjusting spindle.
-- Release and disconnect the connector -2- from the seat angle adjustment motor.
-- Remove the bolts -4- and the seat angle adjustment motor -3-.