Overview - Headrest, With Headrest And Angle Adjustment
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Backrest Frame
- Headrest Guide
- Removing and Installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Press until all three retainers are completely locked into the backrest frame
- Bolt
- Depending on vehicle equipment quantity of 2 or 4
- 2.5 Nm
- Support
- For the headrest trim
- Removing and Installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Headrest
- Cannot be disassembled
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Must be correctly locked in the headrest guides
- Rear Trim
- For the headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Clips
- Rear Gap Covers
- Front Gap Covers
- with beveled corners
- Front Trim
- For the headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Clips