Release the Upper Catches:
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the Wedge 02 from the :VAS895 015 between the cushion and the cover.
TIP:
Insert the outer edge of the wedge from the inside of the seat along the seat seam. Insert the wedge is slightly to the start of the steps.
-- Push the cushion to the side and release the hook -arrow A- and in the catch -arrow B- using the Wedge 03 and at the same time pull the backrest cover downward out of the catch.
-- Repeat the procedure for the hook on the opposite side.
Installing
Install in reverse order of removal and note the following:
-- Check if the backrest cover is correctly latched.