Valve Block 2 In Driver / Front Passenger Seat -N476- / -N478-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Route the pneumatic lines in the cushion and connect them to the valve block.
-- Attach the pneumatic lines until they engage audibly.
-- Apply the bonding with double-sided adhesive tape at the same location it was at the time of removal.
Further installation is the reverse order of removal.