Tire Pressure Monitoring Control Module -J502-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Different installation positions:
- Version 1: at the center rear subframe.
- Version 2: at the left rear tank aerodynamic trim bracket.
- Version 3: at the left rear level sensor.
-- Release the retainer -arrow-, disengage the Tire Pressure Monitoring Control Module -J502- -item 1- from the subframe and remove (example illustration).
-- Disconnect the connector -2- (example illustration).
-- Release the catch -arrow- and remove the Tire Pressure Monitoring Control Module - J502- -item 1- toward the rear (example illustration).