LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Wheels, Tires, Wheel Alignment (Tires & Wheels - Infrared System)) >> 44 Wheels, Tires, Wheel Alignment >> Axle Alignment >> Vehicles With Coil Springs, Checking The Curb Weight Position For Axle Alignment >> Vehicles With Coil Springs, Checking The Curb Weight Position For Axle Alignment, AUDI Q8 >> Dimension -a- Overview

Dimension -a- Overview

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Chassis Distance between the center of the wheel and the lower edge of the fender/wheel housing
  Front Axle Rear axle Tolerance between the right and left
Specified size Tolerance Specified size Tolerance
1BL 488 mm ± 10 mm 499 mm ± 10 mm Less than or equal to 10 mm
scientia non olet · About LEMON Manuals