Oil Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the seal after removal.
- Replace the bolts that were tightened with an additional turn after removing them.
-- Check if the alignment sleeves -arrows- for centering the oil pump are installed.
-- Install the seal -1-.
-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING, WITH LOWER TIMING CHAIN COVER INSTALLED .