LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Sunroof) >> 60 Sunroof >> Sliding Sunroof >> Wind Deflector Bearing, Removing And Installing >> Removing

Wind Deflector Bearing, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the glass panel so that it is tilted all the way.

-- Push the retainers slightly to the side -arrows-.

GWWA60-10583Courtesy of AUDI

-- Remove the bearing for the wind deflector upward.

scientia non olet · About LEMON Manuals