LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Sunroof) >> 60 Sunroof >> Sliding Sunroof >> Sunroof Control Module -J245-, REMOVING AND INSTALLING >> Removing

Sunroof Control Module -J245-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Remove the sun visor. Refer to SUN VISOR, REMOVING AND INSTALLING .

-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

-- Disconnect the connectors -1, 2 and 3-.

GWWA60-10587Courtesy of AUDI

-- Release the tab -arrow A- and push the Power Sunroof Control Module -J245- to the right side of the vehicle from the bracket -arrow B-.