Heater And A/C Unit, Removing And Installing, Pr Number KH5/ 9AU/ 9AE: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the grommets -B-,-C-, nd -F- for damage and proper seating.
-- Check the retaining points -A- for correct installation in the center tunnel and for damage.
-- Check the ball heads on air distribution housing -D-, hich are inserted in retaining points -A-, or damage.
-- Check the outlets at the rear air distribution housing -D-, hich are inserted in the air ducts -E-, nd the air ducts -E- for damage and contamination.
-- Insert the rear air distribution housing -D- into the retaining points -A- and air ducts -E-.
-- Perform a basic setting for the A/C system. Refer to GENERAL INFORMATION AND PROCEDURES FOR REMOVING AND INSTALLING ADJUSTMENT MOTORS .