OVERVIEW - REAR DISPLAY CONTROL HEAD, "Mix" OR "High" A/C SYSTEM, Q7 BEFORE PRODUCT IMPROVEMENT
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- The following illustration shows the Rear A/C Display Control Head -E265-, s shown as it would be installed on a vehicle with a "Mid" or "Mix" A/C system and with the "seat heating" optional equipment. There are different versions of the Rear A/C Display Control Head -E265- with different allocations, pay attention to the correct allocation. Refer to the Parts Information.
- The following briefly discusses the different button functions for the adjustment of the rear vehicle interior air conditioning on the Rear A/C Display Control Head -E265-.An exact description of the different possibilities for the passenger compartment air conditioning via the settings on the Rear A/C Display Control Head -E265- can for example be found in the vehicle Owner's Manual. Refer to the Owner's Manual.
- Via the various settings on the Front A/C Display Control Head -E87- or for the vehicle (active child safety system for example) the Rear A/C Display Control Head -E265- switches off or the possibility to change the settings on the Rear A/C Display Control Head -E265- is locked via the buttons. Refer to the Owner's Manual.
- Right Rear Seat Heating Button
- Illuminated LED indicates the level selected.
- +
Button for Temperature Preset Warmer
- The temperature of the air to the rear vent is calculated via the settings on Rear A/C Display Control Head -E265- and the Front A/C Display Control Head -E87- from the Front A/C Display Control Head -E87- and is activated according to the characteristic curve.
- The set temperature will be shown in the display.
- Temperature Display
- The temperature set on the Rear A/C Display Control Head -E265- for the rear is displayed.
- For various settings in the vehicle (for example active child safety system) the display can be switched off or locked.
- -
Button for Temperature Preset Cooler
- The temperature of the air to the rear vent is calculated via the settings on Rear A/C Display Control Head -E265- and the Front A/C Display Control Head -E87- from the Front A/C Display Control Head -E87- and is activated according to the characteristic curve.
- The set temperature will be shown in the display.
- Left Rear Seat Heating Button
- Illuminated LED indicates the level selected.