OVERVIEW - FRONT DISPLAY CONTROL HEAD, "Low" OR "Mid" A/C SYSTEM, Q7 BEFORE PRODUCT IMPROVEMENT
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Depending on vehicle equipment, there are different versions of the A/C system. Make sure to use the correct version and pay attention to the allocation of different components. Refer to Parts Information.
- The following illustration shows the Front A/C Display Control Head -E87-, s shown as it would be installed on a vehicle with a "low" or "Mid" A/C system with the "seat heating and ventilation" optional equipment. There are different versions of the Front A/C Display Control Head -E87- with different allocations, pay attention to the correct allocation. Refer to the Parts Information.
- The following briefly discusses the different button and knob functions for the adjustment of the vehicle interior air conditioning on the Front A/C Display Control Head -E87-.An exact description of the different possibilities for the passenger compartment air conditioning via the settings on the Front A/C Display Control Head -E87- can for example be found in the vehicle Owner's Manual. Refer to the Owner's Manual.
- Right Seat Heating Button
- Illuminated LED indicates the level selected.
- The selected setting can be set back one unit after a pre-set time
- Right Seat Ventilation Button
- Illuminated LED indicates the level selected.
- Knob for the Right Temperature Preset and the A/C
Button
- A/C Button for A/C Compressor
- The set temperature and the selected function "A/C compressor on" is shown in the differential fuel pressure regulator
- Button for Setting the Air Distribution "to the Instrument Panel Vent"
- Illuminated LED indicates the selected "air distribution".
- Button for Setting the "downward" Air Distribution
- Illuminated LED indicates the selected "air distribution".
- OFF
Button for the Heating and the Climate Controls
- Illuminated LED indicates the "off" function is selected.
- "Parking Air Conditioning" Function Display Symbol
- Turning on of the "parking heater on" or the "parking heater timer / parking ventilation mode active" symbol.
- Only applies to vehicles with the parking heater optional equipment installed. Refer to the appropriate service information .
- Rear Window Defogger Button
- The "Rear window defogger on" function is selected when the LED is on.
- Knob for the Left Temperature Preset and the Auto
Button
- Auto button for automatic heating and A/C system control
- The set temperature and the state of the automatic regulation is displayed in the knob
- Left Seat Ventilation Button
- Illuminated LED indicates the level selected.
- Infrared Sensor for Temperature and Sunlight
- The sensor determines the temperature and sunlight on the display control head.
- A contaminated or taped off infrared sensor determines an incorrect temperature, this can lead to problems with the regulation of the heating and A/C system.
- Left Seat Heating Button
- Illuminated LED indicates the level selected.
- Defrost Mode Button
- Illuminated LED indicates the "defrost mode" function is selected.
- A/C MAX
Button
- the LED turned on shows the selected function "maximum cooling"
- Via this function the vehicle interior is cooled as quickly as possible, if necessary also with a raised fresh air blower speed.
- Fresh Air Blower Speed Preset Knob
- The adjusted or the selected fresh air blower speed is displayed via the turned on LED
- On a vehicle with a "Low" A/C system the speed of the Fresh Air Blower -V2- is regulated according to the setting and the temperature is determined by the Front A/C Display Control Head -E87- according to the characteristics curve.
- On vehicles with a "Mid" A/C system the speed on the Fresh Air Blower -V2- and the Rear Fresh Air Blower -V80- is regulated according to the corresponding setting on the Front A/C Display Control Head -E87- and the Rear A/C Display Control Head -E265- as well as from the Front A/C Display Control Head -E87- determined temperature from the Front A/C Display Control Head -E87- according to the characteristics curve.
- Recirculating Air Mode Button
- Illuminated LEDs indicate the "recirculated-air mode" function is selected.
- The "recirculated-air mode" function is canceled when the defrost mode button (air to the windshield) is pressed
- Button for Setting the Air Distribution "to the Windshield"
- Illuminated LED indicates the selected "air distribution".
- the air is directed upward (to the windshield and the front side window)