Fragrance Diffuser System Temperature Sensor -G1056-, EMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the driver seat as far back as possible.
-- Switch off the ignition.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Release the fragrance container -2- in the direction of the -arrow- and remove.
-- Release and disconnect the connector -3-.
-- Turn the Fragrance Diffuser System Temperature Sensor -G1056- -4- 90° in the direction of the -arrow- and remove from the Fragrance System Functional Unit -GX43- -1-.