Fresh Air Intake With Water Drain, Removing And Installing, Version 1: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the fresh air intake cover. Refer to FRESH AIR INTAKE COVER, REMOVING AND INSTALLING, VERSION 1 .
-- Move the Exterior Air Quality and Humidity Sensor -G935- / Air Quality Sensor -G238- with the Humidity Sensor in Fresh Air Intake Duct -G657- to the side (do not disconnect the connector). Refer to Exterior Air Quality and Humidity Sensor -G935- /Air Quality Sensor -G238- WITH THE Humidity Sensor in Fresh Air Intake Duct -G657-, EMOVING AND INSTALLING .
-- Pull the inner cover -1- in the direction of the -arrow- out of the fresh air intake -2-.
-- Remove the nuts -arrows-.
-- Remove the fresh air intake -1- from the fresh air intake -2- and remove.