Fresh Air Intake With Water Drain, Removing And Installing, Version 1: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Before installing, check the fresh air intake and the related water drain for debris, function, damage and correct assembly.
- Check the line connection to Humidity Sensor in Fresh Air Intake Duct -G657- / Air Quality Sensor -G238- for correct routing.
- Pay attention to the tightening sequence for the nuts when installing them.
-- Tighten the nuts -arrows- diagonally in multiple steps to the specified tightening sequence
-- Install the inner cover -1- on the fresh air intake -2- and make sure its engaged securely.