Component Location Overview - and
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Relay and Fuse Panel 1 -SR1-
- Relay and Fuse Panel 2 -SR2-
- Nut
- 3 Nm
- Mount
- For relay and fuse panel
- Nut
- 16 Nm
- Nut
- 16 Nm
- Positive Cable
- From the battery
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Terminal 30 Wire Junction 2 -TV22-
- Removing and Installing. Refer to Terminal 30 Wire Junction 2 -TV22-, REMOVING AND INSTALLING .
- Nut
- 7.5 Nm
- Cap
- Suppressor -C24-
- Removing and Installing. Refer to Suppressor -C24-, REMOVING AND INSTALLING .
- Terminal 30 Wire Junction -TV2-
- Removing and Installing. Refer to Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING .
- Nut
- 3 Nm
- Quantity: 3
- Positive Cable
- To starter, generator