LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Wiring) >> 97 Wiring >> Control Modules >> Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING >> Vehicle Electrical System Control Module -J519- MOUNT, REMOVING AND INSTALLING >> Removing

Vehicle Electrical System Control Module -J519- MOUNT, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA97-11895Courtesy of AUDI

-- Remove the vehicle electrical system control module. Refer to Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING .

-- Free up the wiring harness -4-.

-- Pry out the cover -2-.

-- Release the catch -1- and push the mount -5- upward until the guides -3- are disengaged.

-- Remove the mount downward.