Impact Guard, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front underbody panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, FRONT .
-- Right: free up the front tunnel heat shield near the impact guard.
-- Remove the nut -2- and the bolts -3-.
-- Push the side underbody trim panel -1- slightly to the side.
-- Remove the nuts -4 and 5- and bolts -1 and 3-.
-- Remove the impact guard -2-.