Diagonal Braces, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the underbody trim panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, SIDE .
-- Support the subframe using the Engine and Gearbox Jack:VAS 6931 and Engine/Gearbox Jack - Gearbox Support:T10337 .
CAUTION:
Risk of damaging the thread by using an impact wrench.
- When installing, position the bolts by hand and screw in the first threads.
- Do not loosen or tighten the bolts with an impact wrench.
-- Remove the bolts -1 to 5- and the diagonal brace.
-- Re-install the bolts -2 and 4- all the way.