Center End Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the Pedestrian Protection Center Crash Sensor -G693-. Refer to PEDESTRIAN PROTECTION CENTER CRASH SENSOR -G693-, REMOVING AND INSTALLING .
-- If equipped, remove the night vision system camera and free up the washer fluid hose. Refer to NIGHT VISION SYSTEM CAMERA -R212-, REMOVING AND INSTALLING .
-- If equipped, remove the spray nozzles for the Laser Distance Regulation Control Module -J1122-. Refer to WASHER NOZZLES, REMOVING AND INSTALLING .
-- Free up the wires on the center end panel.
-- If equipped, remove the locking clips -3-.
-- Remove the bolts -2-.
-- Release the retainers -arrows-.
-- Remove the center end panel -1-.