LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Exterior Equipment) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Trim Molding, Removing And Installing >> Trim Molding, Removing And Installing, Side Window >> Removing

Trim Molding, Removing And Installing, Side Window: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the side window. Refer to REAR SIDE WINDOW, REMOVING AND INSTALLING .

-- Bend the tabs -1- straight.

GWWA66-11463Courtesy of AUDI

-- Carefully pry the trim molding -2- out of the window guide and remove.

scientia non olet · About LEMON Manuals