Trim Molding, Removing And Installing, Engine Compartment Lid: Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

The following components must be replaced after removal. Refer to OVERVIEW - TRIM MOLDING AND COVERS, FROM PRODUCT IMPROVEMENT .

Special tools and workshop equipment required

Roller:T40400

Courtesy of AUDI
Hot Air Blower:V.A.G 1416

Fig 1: Hot Air Blower VAG1416
Courtesy of AUDI
Wedge Set:T10383

Fig 2: Identifying Wedge Set
Courtesy of AUDI
Cleaning Solution:D 009 401 04