Overview - Front Heat Shield

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Front Heat Shield

Courtesy of AUDI

Nut
- Quantity: 2
- 2.5 Nm
Heat Shield
- For the front longitudinal member
- Left
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .
Nut
- There are different versions. Refer to the appropriate Electronic Parts Information.
- Quantity: 4
- 2.5 Nm
Nut
- Quantity: 3
- 2.5 Nm
Heat Shield
- For the front longitudinal member
- Right
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .
Heat Shield
- For the rear longitudinal member
- Right
- Removing and Installing. Refer to REAR LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
Lock Washer
- Quantity: 4
Nut
- Quantity: 4
- 2.5 Nm
Heat Shield
- For the plenum chamber bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
Heat Shield
- For the top of the front tunnel
- Removing and Installing. Refer to UPPER FRONT TUNNEL HEAT SHIELD, REMOVING AND INSTALLING .
Nut
- Quantity: 4
- 2.5 Nm
Heat Shield
- For the lower plenum chamber bulkhead
- Removing and Installing. Refer to LOWER PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
Heat Shield
- For the rear longitudinal member
- Left
- Removing and Installing. Refer to REAR LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
Nut
- There are different versions.
- Quantity: 4
- 2.5 Nm