Rear Lid, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Adjust the rear lid. Refer to REAR LID, ADJUSTING .

-- Calibrate the Rearview Camera -R189-. Refer to Rearview Camera System .

Note the conditions here for a required calibration of the Rearview Camera -R189-.

-- Calibrate the Rear Peripheral Camera -R246-. Refer to Peripheral Camera .

Note the conditions here for a required calibration of the Rear Peripheral Camera -R246-.

Tightening Specifications

Refer to OVERVIEW - REAR LID