Rear Lid Control Module -J605-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Insert the control module and push it to the right until the catches engage audibly.

If the Rear Lid Control Module -J605- is replaced, select the "Replace control module" function for the respective control module on the Vehicle Diagnostic Tester, Diagnostic .