LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Striker, Removing And Installing >> Installing

Striker, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the striker according the marking made during removal.

-- Adjust the striker. Refer to SIDE AND HEIGHT ADJUSTMENT AT STRIKER .

scientia non olet · About LEMON Manuals