Overview - Release in Vehicle Interior

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Hood Release (In Vehicle Interior)

Courtesy of AUDI

Operating Lever
- For the latch
- Removing and Installing. Refer to LATCH RELEASE LEVER, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 2 Nm
Mounting Bracket
- For latch release lever
- Removing and Installing. Refer to LATCH RELEASE LEVER MOUNTING BRACKET, REMOVING AND INSTALLING .
Expanding Nut
- Quantity: 2
Release Cable
- For latch release lever
- Removing and Installing. Refer to LATCH RELEASE LEVER RELEASE CABLE, REMOVING AND INSTALLING .
Grommet
- Check for proper seating
- If damaged, replace the release cable for the latch operating lever. Refer to LATCH RELEASE LEVER RELEASE CABLE, REMOVING AND INSTALLING .
Clip
- For the release cable
Cap
Release Cable Nipple
- Is inserted in the coupling guide element
Coupling with Release Cables
- For the latches
- Removing and Installing. Refer to COUPLING WITH LATCH RELEASE CABLES, REMOVING AND INSTALLING .
Adjusting Thumbwheel
- For the release cable
- For adjusting the trigger point for the latches
Clip