Latch Release Lever, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the clip -2- out of the release lever -1- slightly -arrow A- using a small screwdriver.
-- Pull the operating lever toward the rear -arrow B- to release the hood and hold it in this position.
-- At the same time, pull the release lever so it is level with the center of the vehicle and out of its mount -arrow C-.