Hood, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the washer nozzles. Refer to WASHER NOZZLES, REMOVING AND INSTALLING .
-- Remove the grommet -2-.
-- Guide out and free up the wiring harness -1- and washer fluid hose -3- from the hood.
-- Mark the installation position of the hinge on the hood.
-- Remove the gas-filled strut from the hinge. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
-- Remove the nuts -arrows- from the hinge.
-- Remove the front lid.