LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Hood, Lids) >> 55 Hood, Lids >> Fuel Filler Door Unit >> Emergency Release Cable, Removing And Installing >> Removing

Emergency Release Cable, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the fuel filler door unit. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING .

-- Remove the fuel filler door lock motor. Refer to Fuel Filler Door Lock Motor -V155-, REMOVING AND INSTALLING .

-- Thread the emergency release cable -1- out of the guide -4-.

GWWA55-11112Courtesy of AUDI

-- Disengage the tab -3- on the emergency release mount -2- and remove it from the emergency release cable support bracket.