LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Hood, Lids) >> 55 Hood, Lids >> Charge Door Unit >> Charge Door Unit Trim, Removing And Installing >> Removing

Charge Door Unit Trim, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Open the charge door.

-- Release the clips with a screwdriver in the gap between the trim -2- and the charge door -1-.

GWWA55-10888Courtesy of AUDI

-- Pull the trim slightly toward the rear from the charge door -arrow- and remove it.