Starter, Removing And Installing, Vehicles With 2.0L TFSI Engine: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the air filter housing. Refer to AIR FILTER .

-- Remove the right engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Remove the bolt -arrow-.

Fig 1: Identifying Plenum

Courtesy of AUDI

-- Remove the nut -4- and free up the 30/B+ wire terminal -2-.

Fig 2: Identifying Starter Overview

Courtesy of AUDI

-- Release and disconnect the connector -3-.

-- Remove the bolt -5-.

-- Remove the starter -1-.