Carbon Brushes, Checking, HITACHI Generator
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .
-- Check the length -a- of the carbon brushes -1-.
- Wear limit: -a- = 6.5 mm.
-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .