Contact Corrosion
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Contact corrosion can occur if incorrect fasteners (bolts, nuts, washers, etc.) are used.
For this reason, only fasteners with a special surface coating may be installed.
Furthermore, only rubber/plastic parts and adhesive made of electrically non-conductive materials are used.
If there are doubts about whether parts can be used or not, then use new parts. Refer to the appropriate Electronic Parts Information.
Note:
- It is recommended to use Audi original replacement parts. They have been tested and approved.
- It is recommended to use Audi original accessories.