LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Front Brakes >> Brake Rotor, Removing And Installing >> Brake Rotor, Removing And Installing, Ceramic Brakes Q7/Q8 >> Installing

Brake Rotor, Removing And Installing, Ceramic Brakes Q7/Q8: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Before reusing ceramic brake rotors check for wear and damage. Refer to BRAKE ROTORS, CHECKING, CERAMIC BRAKES .

-- Thoroughly clean the brake rotor and hub contact surfaces and clear them of corrosion.

-- Do not tilt the brake rotor when mounting it on the wheel hub.

-- Tighten the bolt -arrow-.

Fig 1: Identifying Bolt And Brake Rotor
GWWA46-10405Courtesy of AUDI

-- Install the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, Q7/Q8 .

CAUTION:

Faulty brakes increase the risk of an accident.

- Make sure the brakes are working correctly before driving the vehicle for the first time.