Brake Caliper, Removing And Installing, Q7/Q8: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front wheel. Refer to WHEELS AND TIRES .

-- Disconnect the connector -1- for the brake pad wear indicator.

Courtesy of AUDI

-- Release the connector -2- for the brake pad wear indicator from its bracket in direction of -arrow A- while turning it 90° at the same time in direction of -arrow B-.

-- Free up the brake hose -3- on the bracket.

Vehicles with Six-Piston Brake:

Courtesy of AUDI

For easier removal of the brake caliper from the brake rotor, push the brake pads -3- back lightly with pliers -1-.
To prevent damage to the paint coat on the brake caliper, place a piece of rubber -2- between the pliers and brake caliper.

Vehicle with Ten-Piston Steel Brake:

Courtesy of AUDI

For easier removal of the brake caliper from the brake rotor, push the brake pads -3- back lightly with pliers -1-.
To prevent damage to the paint coat on the brake caliper, place a piece of rubber -2- between the pliers and brake caliper.

Continuation for All Vehicles:

Courtesy of AUDI

-- Remove the bolts -2- and carefully remove the brake caliper -1- with the brake carrier and the installed brake pads from the brake rotor.

CAUTION:

There is a risk of damaging the brake hose due to the weight of the brake caliper.

- Never let the brake caliper hang on the brake hose.

-- Hang the brake caliper using a suitable wire.

CAUTION:

There is a risk of damaging the brake caliper piston if handled incorrectly.

- Never operate the brakes when the brake caliper is removed.