Brake Pedal, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the mounting pin -3- from the left to the right until it stops.
-- Secure the mounting pin with the clamp -2- and screw -arrow- (shown on LHD vehicles).
- Make sure the clip -2- sits completely in the mounting pin groove.
- A damaged mounting pin clip must be replaced.
-- Connect the brake pedal -1- to the brake booster. Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.