Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Impact Puller: T10133/3 from Injector/Combustion Chamber Seal Tool Set: T10133C
- Camshaft Adjustment Pins: T40060 (with the engine installed)
- Locating Pins: T40116
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Sealant. Refer to the Parts Information.
- M8x25 Bolts (quantity 2)