Chain TENSIONER, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the seal after removal.
-- Install the upper timing chain cover. Refer to TIMING CHAIN GUARD UPPER SECTION, REMOVING AND INSTALLING .
-- If changes on the timing chain make place or components should be replaced, perform the corresponding adaptations in the Guided Functions "0001 - Engine electronics, functions". Use the Vehicle Diagnostic Tester.