LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Assembly (6-Cylinder Direct Injection 3.0L 4V TFSI Engine Ea839)) >> 10 Engine Assembly >> Assembly Mounts >> Transmission Mount, Removing And Installing >> Left Transmission Mount, Removing And Installing, AUDI Q8, AUDI Q7 Through 10/26/2020 >> Removing

Left Transmission Mount, Removing And Installing, AUDI Q8, AUDI Q7 Through 10/26/2020: Removing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Remove the left subframe shield upper section. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the left transmission mount heat shield -1-.

GWWA10-11427Courtesy of AUDI

-- Open the clip -2- and free up the coolant hose.

GWWA10-12217Courtesy of AUDI

-- Remove the bolts -arrows-.

-- Remove the transmission support -3- for the transmission mount -1-.

-- Disconnect the connector -2- for the Transmission Mount Valve 2 -N263-.

Fig 1: Transmission Mount Valve Component Location
GWWA10-11438Courtesy of AUDI

-- Remove the bolts -arrows-.

-- Remove the left transmission mount -3-, for this, pry out of the mount -1-.