Engine, Securing To Engine And Transmission Holder

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine and Transmission Holder:VAS 6095A

Fig 1: Engine And Transmission Holder
Courtesy of AUDI OF AMERICA, LLC
Engine/Transmission Holder - Universal Mounting:VAS 6095/1

Fig 2: Identifying Universal Mount VAS 6095/1
Courtesy of AUDI OF AMERICA, LLC
Engine Bracket V8 TFSI:VAS 6095/1-17A , not illustrated
Engine Bracket V8 TFSI MLB:VAS 6095/1-18B , not illustrated

Procedure

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the left engine support -1-.

-- Remove the nuts -arrows- and free up the wires (example image).

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the right engine support -1- (example image).

Courtesy of AUDI OF AMERICA, LLC

-- Secure the starter on the engine.

-- Secure the engine to the Engine and Transmission Holder:VAS 6095 as shown, for this, note the installation instructions from the manufacturer.

Courtesy of AUDI OF AMERICA, LLC

Engine/Transmission Holder - Universal Mounting:VAS 6095/1
Engine Bracket V8 TFSI MLB:VAS 6095/1-18B
Engine Bracket V8 TFSI:VAS 6095/1-17A
Engine and Transmission Holder:VAS 6095A

-- Secure the Engine Bracket V8 TFSI MLB:VAS 6095/1-18B -item 2- and the Engine Bracket V8 TFSI:VAS 6095/1-17A -item 3- with 40 Nm.