Right Transmission Mount, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .
-- Remove the subframe crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .
-- Remove the right upper subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Free up the coolant hose.
-- Remove the bolts -arrows- and remove the right transmission mount -1- with the transmission support.
-- Remove the bolt -arrow-, remove the transmission support -1- and pry out the mount -3- from the transmission mount -2-.