Driving Dynamic Support Mounting Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driving dynamic support. Refer to DRIVING DYNAMIC SUPPORT, REMOVING AND INSTALLING .
-- Remove the left front wheel housing liner front section. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Remove and lower the front upper right control arm on the suspension strut tower. Refer to UPPER CONTROL ARM, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and move the coolant expansion tank -1- with the coolant hoses connected.
-- Remove the bolts -4- in the wheel housing and remove the mounting plate -1-.