Electro-Hydraulic Engine Mount, Calibrating
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- 0001 - OBD-Capable Systems or Diagnostic-Capable System
- 00BA - Assembly Mount Control Module
- 00BA - Assembly Mount Control Module, Functions
- 00BA - Basic Setting, Performing
- Perform the test