REDUCING AGENT (ADBLUE®), FILLING USING AdBlue Filling System:VAS 6960

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

AdBlue Filling System:VAS 6960

Fig 1: AdBlue Filling System VAS6960
Courtesy of AUDI

Procedure:

-- Open the fuel filler door and remove the cap for the reducing agent tank.

-- Using a lint-free cotton cloth soaked in water, clean the filler neck for the reducing agent.

-- Guide the nozzle on the AdBlue Filling System:VAS 6960 into the reducing agent tank filler neck.

-- Operate the nozzle and completely fill the reducing agent.

-- Remove the nozzle from the reducing agent tank filler neck.

-- Use a lint-free cotton cloth soaked in water to clean the reducing agent tank filler neck and cap.

-- Attach the cap for the reducing agent tank.

NOTE:

Pay attention to the AdBlue Filling System VAS 6960:VAS 6960 operating manual.

The nozzle for the AdBlue Filling System:VAS 6960 switches off automatically when the maximum fill level is reached.