Brake System, Checking Brake Hose Condition And Presence Of Bleed Screw Protective Caps
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Requirements:
- When at the maximum steering angle, the brake hoses must not touch other vehicle components.
- The brake hoses must not be twisted.
Procedure:
-- Make sure all brake hoses are attached properly and observe the specified requirements.
-- Check all brake hoses for chafing, porosity, bubbles and cracks.
-- Make sure the brake hose connections are seated correctly and check for corrosion and leaks.
-- If a defect is located on the brake hoses, repair or replace the affected component.
-- Check on all brake calipers if the bleed screw protective caps are present and attached.
-- Replace any missing protective caps.