Steering Gear End Positions, Adapting

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

If the steering gear were replaced on an Audi Q7, then the end position of the steering gear must be readapted.

Special tools and workshop equipment required

Vehicle Diagnostic Tester

Procedure

-- If the "Control Module, Replacing" program for the Power Steering Control Module -J500- is completed, then also select the "Steering Gear End Positions, Adapting". Refer to DIAGNOSTIC ENTRIES .

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.