Steering Column, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver side footwell vent. Refer to DRIVER SIDE AIRBAG .

-- Remove the steering column switch module. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- and remove the steering intermediate shaft universal joint -1- from the steering column -2-.

Courtesy of AUDI

-- Versions with power steering column: disconnect the connector -arrow-.

Courtesy of AUDI

-- Remove the bolts in the sequence -1 through 4-. Support the steering column -arrow- from underneath with one hand while doing this.

Fig 1: Steering Column - Tightening Sequence

Courtesy of AUDI

-- Disengage the steering column toward the rear and lower carefully.

TIP:

The installation position of the version with a mechanical steering column is shown.

-- Disconnect the connector -3-.

Fig 2: Identifying Electronic Steering Column Lock Control Module

Courtesy of AUDI

-- Remove the steering column.